- 3dlabprint printer setting update#
- 3dlabprint printer setting skin#
- 3dlabprint printer setting free#
3dlabprint printer setting free#
Dont get us wrong, OWLplane also support Cura.įeel free if you still want to use Cura instead. It is not as convenience as ideaMaker and S3D in OWLpane subjective opinion. In cura, you have to modified object instead of by adding/updating/introducing some settings. ideaMaker uses “Layer Group Settings”, S3D uses Processes and Cura uses object modifier or support blocker technique. Unfortunately, Cura is not as easy to use when requiring feature like it has in ideaMaker and S3D for creating different setting for layers. It can slice what ideaMaker and S3D also slice with utilizing STL file modifier,Ĭura is another excellence free slicer. If you have not invested in S3D, OWLplane highly recommend to use ideaMaker instead, no difference from slicing OWLplane 3D Printed Plane and its free ! No worry, if you have invested your time and your favorable slicer is Cura, OWLplane provide Cura Profiles and STL file modifier to use for slicing OWLplane STL files. In short, S3D has better preview on sliced object where ideaMaker has better user interface/workflow for working on different Profiles in OWLplane subjective opinion. After having experience utilizing ideaMaker, both S3D and ideaMaker Slicers are used since both having the same required features and easy to use. Initially, OWLplane only utilize S3D during development time. But LW-PLA/ePLA-LW is also supported for some parts (spars should be used if printed with LW-PLA/ePLA-LW and available for all models). No need LW-PLA/ePLA-LW for reducing weight up to 30%. Nozzle size is 0.30mm – 0.40mm, best with 0.30mm. You may notice that the result will have 20% – 30% less weight with regular PLA or PLA+.ģD Printer volume min. If you have 0.4mm Nozzle, you may want to try G-code files for 0.3mm Nozzle and see if the Nozzle still can print with acceptable quality. G-code files are provided for you to start with both 0.3mm and 0.4mm Nozzle.
3dlabprint printer setting update#
S3D, Cura and ideaMaker Profile files are provided for your Direct Drive and Bowden Printer setup for both 0.3mm and 0.4mm Nozzle but only for PLA (for other Filaments, just update the temperature Profile files accordingly and follow manufacture setting recommendation for LW-PLA/ePLA-LW). It is also important to double up on the lower layers as per the instructional videos I found.Ĭome back with some pictures when you have had a go with these alterations.Once you have downloaded, you can start printing your plane with Filaments that you choose such as PLA, ASA, ABS, HIPS and LW-PLA (note: not all parts are suitable if using LW-PLA/ePLA-LW). If you over do the cover the filament starts to grind. I also partly covered over the printer to hold in some heat. Cover the front of the printer to prevent drafts. I also printed the larger parts on their own which helps. Absolutely the only solution I found that worked. I coated the glass with thinned PVA which prevents warping when printing the wings. It usually starts printing when the bed cools to 70☌ When I was ready to print I took the bed up to 75☌ then went straight to printing. Include a skirt to your liking and set the bed to 60☌ for the whole print. I found the trick was to alter the following. I use Innofil PLA for my prints which come out fantastic. The mustang will be just the same I am sure we can compare notes. Juss I am using S3D with much improved results while printing the Spitfire. Good luck printing the spit! Mine has about 30 flights on it now and I am constantly suprised about how great it flies. I did not print the entire wing in one inning like stepan does in the videos.
Turn cooling off completely for good layer adhaesion and something I did do was print every part on ist own. It doesnt do much to the weight but the parts are a lot stronger. What I did do in S3D was print with a layer width of 0,48mm. I cant give you any tips with cura, I sliced all parts in Simplif圓D which worked very well for me. Yep, the silver Spitfire and the following silver P-51 both came out fine. I may do the Thunderbolt in silver if the Spitfire comes out OK.
3dlabprint printer setting skin#
I have used XT on a few other prints and I find increasing the material flow to 110% makes for a very strong single skin which is very flexible.Īnyway, hope your silver model is coming out well. Did you use the supplied profiles for Cura, or did you modify them. Just interested to know if you had any tips when setting up the printer. I already have the recommended battery and Speed controller so initial cost is lower. I am going to use the smaller motor option on the first model using ColorFabb BLUE GREY PLA. Hey WTFockewulf I fly model airplanes and found your thread while searching Google for people who have printed the 3dLabPrint Spitfire.